Rainwater process

Please see our charge rates for all parts of the process.

Step 1– Initial consultation Underground Rain Water Tank Design

We will sit down with you and explain how the system works and let you know what is feasible in your situation. If it is an existing house we will come out and look at what is there, we just need the plans if it is a new house. You can skip this step but we find it invaluable to clients who have not dealt with rain water before and it is an opportunity to have all your questions answered. We do need to charge for the time spent answering questions.

Step 2 – Design and Quote

We will do a detailed plan that is used to quote the job.

Step 3 – Approvals

A water tank may need planning approval depending on its size and where it is placed. On a residential property where the tank is along the side or at the back of the house and set back from the boundary and installed to building regulations it is unlikely council approval will be necessary.

Step 4 – InstallationRain Water - Technical

We work with many builders and how much we do will depend on the builder, in many cases we will work directly with the builder in others we will install the system after handover of the house. We will provide the builder all the information he needs so we can easily connect the rainwater catchment system into the builders pipe work.

If it is a retro fit we can complete the whole installation.

Step 5 – Handover

We will show you how to use the system and clean the filters.



<< Previous Next >>